RTCO12 check valve

Reverse shut–off valves are direct-acting valves that cut off the return flows of liquids/gases and pass direct ones. They are used in the food industry, medicine, pharmaceuticals, mechanical engineering, housing and communal services, and the oil and gas industry. They are made of food grades of steel, high-strength alloys, elastic compositions. Low-carbon alloys, stainless steel, and materials with a high chromium content are used for production.

Dependence of the properties of RTK 012 type valves on the materials of manufacture

4 types of steel alloys are used for the production of RTK steel check valves and their individual elements:

• 09G2S is a low–alloy structural steel of high strength. The percentage of carbon in the total mass of the alloy is not more than 0.12%. It is applicable for systems conducting natural gas, oil, water, industrial liquids. The material has a high temperature range from -70 to +4500C.
• 20X13 is an alloy with a carbon content of up to 0.2%. It is used for the manufacture of parts with increased plasticity, exposed to mildly aggressive substances, acid solutions, salts, precipitation. Shut-off valves made of this grade of steel are in demand in chemical industries, housing and communal services, at enterprises of the agro-industrial and machine-building industries.
• Cryogenic steel grade 12X18N10T has heat-resistant properties. The products withstand the heating of aggressive media over 300 0C, have increased corrosion resistance, resist intercrystalline corrosion.
• Corrosion-resistant steel 10X17N13M3T authentic grade with low carbon content. Valves made of this alloy are in demand for tanks and pipeline systems working with aggressive environments and elevated temperatures: petroleum products, chlorides, acids.

It is possible to manufacture check valves of the RTK 012 type from other steel grades according to your order: high-alloy, low-temperature resistant, chrome-manganese, heat-resistant alloys.

Advantages of RTK 012 type check valves

• The products are manufactured for butt welding, for coupling, flange connections, for installation in systems using counter flanges.
• Produced according to TU-3742-002-71634056-2010 .
• They have the dimensions of the passage sections DN 15, 20, 25.
• Products corresponding to four classes of tightness are produced.
• They are supplied with seals with a fluoroplastic seal.

You can buy steel check valves of the RTK 012 type at low prices in the manufacturer of shut-off valves "RTMT".